What is the standard height for closet shelves?

Generally, a closet shelf is about 87 inches above the floor, and a single closet rod is mounted at around 72 inches in height.

Likewise, what is the standard depth of closet shelves?

A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women's shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.

Beside above, how long can closet rods go without support? For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

Similarly, you may ask, how much space should be between closet rod and shelf?

Measure for the distance away from the wall. A minimum of 10 inches is best, but it'll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

How wide should closet shelves be?

Some Important Numbers to Keep in Mind A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women's shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.

What is the best wood for closet shelves?

If you're putting a shelf in the den or kitchen, you want it to look good, but in a closet, strength and stability are more important. You can get that from a variety of materials, and the least expensive is plywood. If you're stuck on solid wood, pine and cedar are good choices.

What is the standard depth of a wardrobe?

Most wardrobe cabinets typically are 24 inches deep, but can be as narrow as 18 or even 12 inches in depth. Height also depends on application, but standard height is usually no more than 72 inches. Width varies anywhere from between 24 inches to more than 96 inches.

What is a good shelf depth?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

What is the minimum depth of a wardrobe?

480 mm

What is a standard closet size?

The size of a closet can vary widely. A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.

What is a good size master closet?

Layout and Space RequirementsA walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.

How wide does a closet need to be to hang clothes on both sides?

The short answer: If you want hanging clothes on both sides, you need at least a full 6′ wide space. Any less and people will have a really hard time maneuvering in the space. Especially if they are anything more than average size adults.

How do I double out my closet space?

Steps

Make double hangers. If you have a tab from a soda can, you can easily double up on all your hangers.
Use upside down shelf brackets on bare walls.
Invest in an over-the-door rack.
Store a plastic or wooden set of drawers in your closet.
Install double rods for short hanging clothes.

How deep should a closet be to hang clothes?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn't deep enough to allow hanging clothes.

How high should a shelf be from the floor?

For hanging shelves above a couch, measure 10” above the back of the couch. When hanging shelves on a hallway wall, measure up from the floor 5-6 feet. For hanging shelves on a dining room or living room wall, measure up from the floor 4-4.5 feet.

How do you reinforce a closet rod?

Push a solid dowel rod into a hollow closet rod. Measure the inner diameter of the closet rod and get a dowel rod that is slightly smaller in diameter. Cut it to length, using a hacksaw. Push it all the way through until the dowel fills the hollow space.

How wide is a hanger in inches?

Hangers for clothing and fashion accessories are available in a variety of styles, materials, and sizes. Standard adult hangers are usually around 17 inches wide, while children's hangers are only 12 to 14 inches wide. Specialty hangers for pants and skirts are available in 14 inches.

How much support does a closet rod need?

A center support is required for beams longer than 48 inches. Additional supports are recommended if the closet rod will be supporting especially heavy apparel (i.e. winter coats, heavy weight suits, etc.). The maximum allowable load for the closet rod is 45 pounds per foot.

How long are closet rods?

Double-hung rods are typically 4 feet long each. Usually, one person takes up about 4 feet of closet-rod length.

What is the size of a standard clothes hanger?

Standard-sized adult hangers measure 17-18 inches.

How big is a coat hanger?

Coat hangers are typically 19 inches wide -- add a heavy coat and it's cramped at 24 inches.

How deep should a shoe shelf be?

Inherently, the depth of a shoe rack should consider and correspond to the length of one's shoe. A depth of 13 inches (33 cm) will work for nearly all users as anything more than this would leave unoccupied unless needed to store shoe boxes rather than just the shoes themselves.

How do you frame a closet?

Cut the top and bottom wall platesCut 2x4s to fit between the walls for the top and bottom plates and mark the position of the studs, door openings and intersecting wall on both (Fig. A). Align the outside edge of the bottom plate with the chalk line and screw or nail it to the floor.